Solar Wire

Step Four

Now comes the moment of integration.

If your handpack has red and black wires leading to the battery clips, then: remove the battery clips, and connect the red to the solar lamp's LED's positive connection, and the black to the solar lamp's negative connection.

If your handpack's circuit board is connected directly to the battery clips, then solder in some short wires to the battery clips, and connect those to the appropriate positive and negative ex-LED holes on the solar lamp.

I found one of those cheap clippy things from Radio Shack to be very useful in holding the parts together during this stage.

At this point, you probably want to run around the house to find a dark room and see if it works. It's pretty exciting and all.

Anyway, we are just about done.

On to the last step, Step Five...